Solar Generators Explained: How to Size a Power Station for Outages
A "solar generator" is a portable power station (a battery with outlets) plus solar panels to recharge it. It is quiet and safe indoors. Here is how to size one without overspending.
Two numbers matter
- Watt-hours (Wh): how much energy the battery stores. This sets how long it runs.
- Watts (W): how much it can deliver at once. This sets what it can run.
Step 1: List your must-have devices
For each device, multiply its watts by the hours you use it per day. Add them up. Use the label on the device or its manual.
| Device | Formula |
|---|---|
| LED light | watts x hours per day |
| Phone charging | watts x hours charging |
| Fridge | check the label; it cycles on and off |
| Medical device | ask your doctor or the maker |
Step 2: Match the battery
Pick a power station with more watt-hours than your daily total. Leave room for losses. Make sure its output watts exceed the largest device you will run, including start-up surges.
Step 3: Size the solar
A simple rule: panel watts needed is about daily watt-hours divided by peak sun hours in your area. Clouds, angle and heat cut output, so add margin. The Department of Energy's homeowner guide covers whole-home solar if you want to go bigger.
Gas generators: safety rules
See carbon monoxide safety and power outage: first hours.
Ready to compare models? See the solar generator buying guide.
Recommended gear
Affiliate disclosure: Some links on this page are affiliate links. If you buy through them, we may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Read our affiliate disclosure.
Sources
Sources checked 2026-11-17. Official guidance changes; always follow your local authorities.
